Brother International PR1050X Operation Manual - Page 109

Touch , or to display the keys c for specifying the starting position, rotating the pattern or moving the embroidery frame. • For details on each of the keys, refer to the following sections. "Starting/Ending Position Settings" on page 135, "Adjusting the angle" on page 99 and "Changing the Embroidering Position" on page 98. 1 2 3 1 Use these keys to adjust the embroidering position by moving the embroidery frame. 2 Use these keys to rotate the pattern. 3 Use these keys to specify the starting position of sewing. • While using these three key panels in the enlarged camera image, panels will be invisible to show the pattern and the camera image clearly. Touch to return to the normal camera d image. OTHER BASIC PROCEDURES Memo • The three key panels can be repositioned so that the pattern can easily be viewed. Touch the center of the top of a key panel to view possible locations where the panel can be repositioned. Touch the desired location to move the selected key panel. 3 The possible locations for repositioning the panel appear in gray. The key panel moves to the selected location. Touch e screen. to return to the previous Note • When using the camera to align the embroidering position on thick fabric, use the thick fabric sensor as described in "Positioning the pattern on thick fabric" on page 104. 107