Brother International PR1050X Operation Manual - Page 210

3 1 2 4 1 Touch the connecting area 2 Second pattern B 3 First pattern A 4 Touch to move the second pattern. Press to rotate the second pattern in a clockwise arc referring the first pattern as a center. Press to rotate the second pattern in a counterclockwise arc referring the first pattern as a center. Press to rotate the second pattern 90 degrees in a clockwise arc. → Message appears on screen and carriage will move after pressing . Note • The second pattern will be automatically connected to the first pattern without adjustment. Change the position of the second pattern manually using . • The position of the second pattern can be moved using your finger or the included touch pen. • Use , or if you want to align the pattern to the corner of the center of the first pattern, when changing the pattern's connecting position. Prepare two embroidery positioning j stickers. We will follow the on-screen instructions to affix these two stickers to the fabric so that the positioning marks can be detected by the camera. Note • Use the positioning stickers included with this product or purchase replacement stickers (SAEPS2, EPS2: XF0763-001) from your Brother dealer. If any other sticker is used, the camera may not recognize it. • The 182 mm × 257 mm (7 inches × 10 inches) embroidery positioning sticker sheet with strong adhesive is most appropriate for connecting patterns (SAEPS2, EPS2: XF0763-001). If any other positioning sticker is used, it may peel off. If the sticker peels off, the patterns cannot be connected. Affix the first embroidery positioning k sticker onto the fabric within the red lines by using both hands to press down on each corner of the sticker. Affix the sticker with the large circle to the top as shown on machine. Then, touch . → The camera detects the first positioning sticker. 208