Brother International PR1050X Operation Manual - Page 208

Using the Camera to Connect Patterns Instead of using thread marks, the camera can be used to connect patterns. An area of 17 cm × 33 cm (6-1/2 inches × 13 inches) can be embroidered when the camera is used to connect patterns. Select the appropriate frame depending on the size of the embroidery. We recommend using the large embroidery frame (200 mm × 360 mm (7-7/8 inches × 14 inches)) when using the camera to connect patterns. Note • When installing the embroidery frame (small) (40 mm × 60 mm (1-1/2 inches × 2-3/8 inches), cap frames, cylinder frame, sleeve frame, clamp frames, name frame or the round frames, you can not connect patterns using this function. Hoop fabric in the large embroidery frame b (13 cm × 18 cm (5-1/8 inches × 7-1/8 inches)), and then attach the frame to the embroidery machine. • Split (Large-size) embroidery patterns cannot be used with this function. • You can not connect patterns using this function while the machine is set to the Link mode. Connecting three patterns Example: Press to display the embroidering c settings screen. Touch in the embroidering settings screen. • needs to be selected in order to continue connecting patterns. 1 Pattern A 2 Pattern B 3 Pattern C Select the first pattern A, and then touch a . → appears at the bottom left side of the screen, and then changes to . Memo • A pattern cannot be saved in the machine's memory while patterns are being connected. 206