Brother International PR1050X Operation Manual - Page 104

Aligning the Embroidering Position Displaying the fabric while aligning the embroidery position The fabric hooped in the embroidery frame can be displayed on the LCD so that the embroidery position can be aligned. This feature can be used from the pattern editing screen and embroidering settings screen. Press c in the pattern editing screen. Note • When installing the optional embroidery frame holder D, embroidery holder E, Cap frame, or Cylinder frame, the built-in camera cannot be used to align the embroidering position. • For details on using fabric thicker than 2 mm, refer to Positioning the pattern on thick fabric (page 104). Hoop the fabric in the embroidery frame, a and then attach the frame to the embroidery machine. Select the pattern. b When the following message appears, touch d . → The embroidery frame moves so the fabric can be scanned. When the fabric appears as a background e for the pattern, the pattern can be edited if it is necessary. Note • Check page 7 of settings screen to make sure the "Fabric Thickness Check" is set to "OFF" when using light to medium weight fabrics. (Refer to "Positioning the pattern on thick fabric" on page 104.) 102