Brother International PR1050X Operation Manual - Page 165
Connecting the USB using the, included USB cord clamps
View all Brother International PR1050X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Connecting the USB using the included USB cord clamps When connecting the embroidery machine to a computer, use the included USB cord clamps to keep the cord away from the carriage. SELECTING/EDITING/SAVING PATTERNS Open the USB cord clamp. b • With your fingernail, press on the tab to open the clamp. 1 Included cord clamps Installation positions of the USB cord clamps 1 2 1 Tab Hold the clip end of the USB cord clamp, c and then firmly insert the other end into the screw hole where the protective cap was removed. 5 1 Front screw hole on the side of the machine 2 Rear screw hole on the side of the machine Using the included Allen screwdriver, a remove the protective cap covering the front screw on the side of the machine. • Insert the end of the Allen screwdriver into the hole in the protective cap, and then lightly pull out the protective cap to remove it. As described in steps a through c, d remove the protective cap from the rear screw hole on the side of the machine, and then insert an opened USB cord clamp. Note • Do not insert the Allen screwdriver too far into the hole in the protective cap; otherwise, the machine or the Allen screwdriver may be damaged. 163