Brother International PR1050X Operation Manual - Page 185

SELECTING/EDITING/SAVING PATTERNS Trimming the threads between characters If the machine is set to trim the threads between the characters, the jump stitches between the characters are reduced and any other necessary procedures after embroidering are reduced. However, the embroidering time will increase if the threads are trimmed between each of the characters. Touch a so that it changes to . Memo • The selected character is assigned as Number 1. Select the group of character patterns that b you want to combine. • You can select the patterns by touching them on the screen, or touching or to check the patterns • Each touch of the key turns the setting either on or off. to be selected, and then touch . 5 Threads are not trimmed. Threads are trimmed. Combining the separated character patterns Two separated lines of character patterns can be combined. The characters can be aligned to the specified order. You cannot combine the lines of character patterns if the text contains a line feed using the Line Feed function. Touch . a → Numbers 1 and 2 are assigned temporarily to the patterns. Touch or c the 2 patterns. to choose the order of → The following screen is displayed. 183