Brother International PR1050X Operation Manual - Page 281

APPENDIX Using the Optional Bobbin Winder When winding the bobbin thread onto a metal bobbin, use the optional bobbin winder. The procedures for using the optional bobbin winder are described below. Precautions For precautions concerning the power supply, refer to page 32. CAUTION • Be sure to place the bobbin winder on a level, stable surface. • Only use the bobbins supplied with this bobbin winder. Optional bobbin winder and its accessories Check that the following bobbin winder and accessories are included. 1. 2. 3. 4. 5. 1 Main power switch 6. 7. 8. 9. 2 Bobbin winder shaft 3 Hole for thread guide 4 Hole for spool pin 5 DC input connector 10. 7 No. Name Part Code 1 Bobbin winder 2 Spool pin 3 Spool cushion 4 Thread guide 5 AC adapter* PRBW1 XC5949-051 XA0679-050 XC6644-151 - * Visit your authorized Brother dealer. No. Name 6 Power supply cord* 7 Metal bobbin × 5 8 Spool cap 9 Weight (L) 10 Weight (S) Part Code - 100376-051 130012-054 XC5974-151 XC6631-051 Memo • The part code of the bobbin winder set may differ depending on the country/area where the machine was purchased. • Depending on the model you purchased, the bobbin winder may be included with the machine. 279