Brother International PR1050X Operation Manual - Page 259
Removing the table
View all Brother International PR1050X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 259 highlights
Removing the table Loosen the two thumb screws, lift up the a table, and then pull it off toward you. APPENDIX Carefully pull out the table so that it does c not hit the machine. 1 Thumb screw Tighten the thumb screws on the table. d After the pins on each side reach the b notches in the guide plates, raise the table 7 to lift the pins up through the notches. 1 Pin 2 Notch → Remove the table from the machine. 257
APPENDIX
257
7
Removing the table
a
Loosen the two thumb screws, lift up the
table, and then pull it off toward you.
1
Thumb screw
b
After the pins on each side reach the
notches in the guide plates, raise the table
to lift the pins up through the notches.
1
Pin
2
Notch
→
Remove the table from the machine.
c
Carefully pull out the table so that it does
not hit the machine.
d
Tighten the thumb screws on the table.