Brother International PR1050X Operation Manual - Page 212

After the two positioning stickers have been m detected, the following message appears. 1 1 Embroidering area While making sure that the two positioning stickers do not peel off, remove the embroidery frame from the machine, and then rehoop the fabric. Be sure to hoop the fabric so the next pattern and both the positioning stickers are within the embroidery sewing area. Reattach the frame and press . Note • If the next pattern and the centers of the large circles of the two positioning stickers do not fit within the embroidering area, use a larger embroidery frame. If a larger embroidery frame cannot be used, continue to step n, and then refer to "Changing the position of a sticker" on page 212 to reposition the sticker. • If the sticker peels off during this procedure, the patterns cannot be connected. If this occurs, restart the procedure from the beginning. • If either of the following messages appear, rehoop the fabric so that the next pattern and both the positioning stickers are within the embroidery sewing area as indicated in the screen. Touch stickers. to detect the positioning 2 Pattern to be embroidered next 3 Centers of large circles for stickers 4 Embroidery sheet → The camera detects the two positioning stickers. 210