Brother International PR1050X Operation Manual - Page 304

The image is going to be deleted. The machine was turned off while sewing, then turned on again. Touch to return the machine to the condition (pattern position and number of stitches) when it was turned off. Follow the procedure described in "Resume Embroidering After Turning Off the Machine" on page 122 to align the needle position and sew the remainder of the pattern. was touched while thread colors were being changed. A saved combined pattern is being rotated in the embroidering settings screen. Color sorting for the combined border pattern will be canceled when is touched. In addition, the thread marks will be removed even if they have been set. The thread picker did not operate correctly. Remove the thread entangled on the thread picker. The thread trimming button was pressed while a screen other than the embroidering screen or embroidering settings screen was displayed. Display either the embroidering screen or embroidering settings screen before using the thread trimming function. Thread guide assembly support is not prepared. Prepare the thread guide assembly. (Refer to "Preparing the thread guide assembly" on page 28.) Machine failed to communicate with the PC in the Link mode. Turn off the machine, and on again. The thread trimming button was pressed before the machine was unlocked. Touch to use the thread trimming function. 302