Brother International PR1050X Operation Manual - Page 62
thread into the number 1 needle bar thread
View all Brother International PR1050X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Use the included threader to pass the j thread into the number 1 needle bar thread guide. Pass the thread along the number 1 slot to h pass it through the number 1 take-up lever hole from right to left. 1 Needle bar thread guide 2 Threader When all upper threading is complete, be k sure to slide the thread tension lever for thread guide C to the right, closing the holes in the thread guide. 1 Thread take-up lever Pass the thread down through the slot to the i lower thread guide, and then through the hole in the number 1 lower thread guide. 1 Thread tension lever 2 Holes in thread guide C 1 Hole in lower thread guide 60
60
h
Pass the thread along the number 1 slot to
pass it through the number 1 take-up lever
hole from right to left.
1
Thread take-up lever
i
Pass the thread down through the slot to the
lower thread guide, and then through the
hole in the number 1 lower thread guide.
1
Hole in lower thread guide
j
Use the included threader to pass the
thread into the number 1 needle bar thread
guide.
1
Needle bar thread guide
2
Threader
k
When all upper threading is complete, be
sure to slide the thread tension lever for
thread guide C to the right, closing the
holes in the thread guide.
1
Thread tension lever
2
Holes in thread guide C