Brother International PR1050X Operation Manual - Page 187

Select a character size below to c change the character to the desired size. Touch d font. , and then select the desired SELECTING/EDITING/SAVING PATTERNS 1 2 3 1 Selects a less thread density 2 Selects a more thread density 3 Touch this key to close this screen. ■ Selects a less/more thread density Touch . e Changing the thread density (only for selected character and frame patterns) The thread density for some character and frame patterns can be changed. A setting between 80% and 120% in 5% increments can be specified. Touch . a → The screen shown below appears. Less Standard More Touch the keys to select the desired thread b density. Each touch of a key slightly increases or decreases the thread density. • To return to the original thread density (standard), select "100%". 5 After making the desired changes, touch c . → The pattern editing screen appears again. Changing the colors of the pattern The colors of the pattern can be changed and previewed on the screen. By changing the colors of the pattern, the same pattern can be viewed in various ways. If your thread colors are registered in a color thread table and if you used the table for changing color, the thread spools can be assigned with the thread colors that you have. And the pattern displayed in the screen will appear with colors that are almost the same as the actual thread colors. With this operation, the colors of all patterns will be changed, not just those of the pattern being edited. 185