Brother International PR1050X Operation Manual - Page 269
Lightly press down the ring, and then use
View all Brother International PR1050X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 269 highlights
APPENDIX Lower the L-shaped bracket to make it c touch the machine bed and then tighten the two hexagonal screws using the Allen screwdriver (medium). Firmly tighten the screws. Insert the pad between the machine bed e and the ring of the cap frame driver. 1 L-shaped bracket Using the Allen screwdriver (large), loosen d the four hexagonal screws on the inside of the ring. Loosen the screws only by about one turn. 1 Pad 2 Machine bed 3 Ring of the cap frame driver Lightly press down the ring, and then use f the Allen screwdriver (large) to tighten the four hexagonal screws on the inside of the ring. Firmly tighten the screws. 1 Hexagonal screws 2 Allen screwdriver (large) → When the screws are loosened, the ring can be lowered. Note • Do not loosen them too far. 7 1 Ring CAUTION • Make sure that each hexagonal screw is firmly tightened. If any screw remains loosen, injuries may result. Remove the pad inserted in step e. g 267