Brother International PR1050X Operation Manual - Page 81

1 2 7 3 4 5 8 6 9 0 Display No. Key Name Function Page The embroidering progress is shown by the red mark in the 1 indicator. Touch to Progress bar display (in the indicator) only the thread color being embroidered. While sewing embroidery, 2 touch this key for the Reserve Stop machine to stop prior to the p.140 key next color beginning. Switch spool key Change the needle bar 3 (Not available settings from the screen in the without changing the thread "Manual spools on the machine. Color Sequence" mode) p.110 Touch to sew the pattern in the same color, regardless of specified color changes. The 4 Uninterrupted entire thread color sequence embroidery display will appear in the same color. p.142 key/ The progress bar 1 and Monochrome thread color setup display 7 will show the original colors. Touch this key to quit sewing 5 and return to the Return key embroidering settings screen. Unlocks the machine so it can start sewing within 10 6 seconds. When this key is p.64 Unlock key touched, the start/stop button flashes in green. EMBROIDERING TUTORIAL Display No. Key Name Function Touch a key to move the needle bar position to the selected needle bar number. Use when threading the Needle bar needle with the automatic key needle-threading 7 mechanism. Thread color set up display Shows the color and the thread color name (number) for the thread on the needle bar indicated on the key. Thread the machine as indicated here. Page p.55 2 8 Maximum sewing speed Specifies the maximum sewing speed. key p.139 Moves the needle forward or backward through the stitching. Use this key in the following situations: • If the thread breaks or 9 Forward/ Backward stitch key runs out while embroidering • To restart sewing from p.116 the beginning • To continue sewing after the machine was turned off Enables the needle bar 0 Temporary settings to manually be needle bar specified. settings key p.142 Memo • The thread color numbers in the thread color sequence display and the thread color set up display can be changed, for example, to the color name or the thread color number for other brands. (Refer to "Changing the thread color information" on page 225.) 79