Brother International PR1050X Operation Manual - Page 64
Moving and threading a selected, needle bar
View all Brother International PR1050X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Note • If the thread is not correctly passed through the groove in the thread cutter, the message "Wiper error" appears and the needle cannot be threaded. Be sure to securely pass the thread through the groove. • If enough thread is not pulled out, the thread cannot be pulled through the thread cutter. Press the automatic needle-threading e button. ■ Moving and threading a selected needle bar You can move and thread a selected needle bar to the embroidering position at any time. Touch . a • The threader moves back away from the needle. The thread is pulled through the needle eye. • The wiper comes out and catches the thread between the needle and the threader. • The threader goes back to the original home position. This completes the upper threading for needle bar 1. Thread the remaining needle bars in the same way. → The needle bar move screen appears. Touch the key for the needle bar that you b wish to move or thread. Note • If the needle bar to be threaded is not moved to the embroidering position, the needle cannot be threaded with the automatic needle-threading mechanism. For the remaining needle bars, perform the following operation to move the needle bar to the embroidering position before trying to thread the needle. → The selected needle bar moves to the position of embroidery. 62