Brother International PR1050X Operation Manual - Page 218

Connecting patterns to be joined along an edge Select the pattern whose slide distance is to b be measured. Greater design variations can be created by sliding the patterns being connected. The following procedure describes how to use this function to connect patterns so they are joined along an edge. Before connecting the patterns, the basting function will be used to measure the distance that the pattern will be slid. A: First pattern B: Second pattern Continue to the embroidering settings c screen, and then touch to select the basting function. ■ Measuring the distance that the pattern will be slid Note • Steps a through d are for measurement placement only. Be sure to sew trial embroidery using same fabric and threads as project in order to check the embroidering results. Set "Basting Distance" in the settings screen a to "0.0". After the pattern is sewn, remove the fabric d from the frame, and then measure the distance that the pattern is to be slid. 1 Horizontal: 42.8 mm 2 Vertical: 32.8 mm 216