Brother International PR1050X Operation Manual - Page 286

Maintenance Simple embroidery machine maintenance operations are described below. Always keep the machine clean, otherwise malfunctions may occur. Cleaning the LCD Open the hook cover, and remove the b bobbin case. (Refer to page 36.) If the surface of the LCD is dirty, lightly wipe it with a soft dry cloth. Do not use organic cleansers or detergents. Cleaning the machine surface If the surface of the machine is slightly dirty, wipe it with a soft dry cloth. If the machine is heavily dirty, lightly soak a cloth in neutral detergent, squeeze it out firmly, and then wipe the surface of the machine. After cleaning it once with a wet cloth, wipe it again with a dry cloth. CAUTION • Unplug the power supply cord before cleaning the machine, otherwise injuries or an electric shock may occur. Use the included cleaning brush to remove c any lint and dust from the hook and its surrounding area. Note • Do not use chemical products, such as benzene or thinner. Cleaning the hook Periodically remove lint and dust for better performance from Hook race area. Use the included cleaning brush. Turn off the embroidery machine. a CAUTION • If the hook is scratched or damaged, consult your authorized Brother dealer. After cleaning is finished, insert the bobbin d case into the hook, and then close the hook cover. (Refer to page 37.) CAUTION • Unplug the power supply cord before cleaning the machine, otherwise injuries or an electric shock may occur. 284