Brother International PR1050X Operation Manual - Page 107
Using the built-in camera
View all Brother International PR1050X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Using the built-in camera The camera built into this machine can be used to easily align the embroidering position. This is useful for patterns which need to be embroidered in particular position as shown below. Touch d screen. OTHER BASIC PROCEDURES in the embroidering settings Use a chalk pencil to mark the desired a embroidering position. Touch to set the starting point to the e center of the pattern. 3 1 Chalk pencil mark Hoop the fabric. b Touch . f Touch . g Touch the positioning keys to move the h embroidery frame until the chalk mark drawn on the fabric is displayed in the camera view window. Touch the frame movement speed keys to select the speed to move the frame. (Refer to "Changing the Embroidering Position" on page 98.) Note • When hooping the fabric in the embroidery frame, make sure that the embroidery pattern will fit within the embroidering area of the frame being used. 1 Embroidering area 2 Embroidery pattern size 3 Chalk pencil mark Select the pattern. c 1 2 1 Positioning keys 2 Frame movement speed keys 105