Brother International PR1050X Operation Manual - Page 311

APPENDIX Upgrading Your Machine's Software You can use USB media or a computer to download software upgrades for your embroidering machine. When an upgrade program is available on " http://support.brother.com ", please download the files following the instructions on the website and steps below. You can use USB to download software upgrades/updates upf) for your sewing machine. Note • When using USB media to upgrade the software, check that no data other than the upgrade file is saved on the USB media being used for this upgrade. Upgrade procedure using USB media While pressing the automatic threading a button, turn the main power to on. Note • The access lamp will begin blinking after inserting USB media, and it will take about 5 to 6 seconds to recognize the media. (Time will differ depending on the USB media). Touch . d → The following screen will appear on the LCD. Touch . b → The upgrade file is downloaded. Note • If an error occurs, a red text error message will appear. When the download is performed successfully, following message will appear. 7 Insert the USB media into the USB port on c the machine. The media device should only contain the upgrade file. Remove the USB media, and turn the e machine off and on again. 1 USB port 2 USB media 309