Brother International PR1050X Operation Manual - Page 69

■ Resume sewing after the machine was turned off Press the start/stop button. a EMBROIDERING TUTORIAL Set the main power switch to "{". d → The embroidery machine stops and the start/stop button lights up in red. • The thread is not trimmed. Touch b machine. to unlock the embroidery Press the thread trimming button. c → The embroidery machine is turned off and the display and the start/stop button indicator go off. • Sewing can resume after the embroidery machine is turned on again. Back up several stitches to overlap the stitching. (Refer to "Resume Embroidering After Turning Off the Machine" on page 122 for details.) 2 Memo • The machine can be stopped at any time, even while it is embroidering; however, if the machine is stopped when the thread color is changed, it is not necessary to go back through the stitching when embroidering is continued. The machine can be set to stop when the thread color is changed. (For details, refer to "Specifying pause locations before embroidering" on page 140.) ■ If the thread breaks while sewing If a problem occurs while sewing, such as if the thread breaks, the machine stops automatically. Re-thread the broken thread, back up several stitches, and then continue sewing. (Refer to "If the Thread Breaks or the Bobbin Thread Runs Out While Embroidering" on page 116 for details.) → The bobbin and upper threads are trimmed. • Before turning off the embroidery machine, be sure to trim the threads. 67