Brother International PR1050X Operation Manual - Page 68

■ Continuing embroidering To sew the same pattern again, touch . Stopping embroidering The machine can be stopped during sewing. ■ Temporarily pausing Press the start/stop button. a → The embroidering screen appears so the same pattern can be sewn again. To select a new pattern, touch . → The pattern type selection screen appears. Note • Automatic Lock stitching can be set so that it is sewn at the beginning of the embroidery, when starting to sew after changing thread colors, and when trimming the thread. (Refer to "Automatic Lock Stitch Setting" on page 134.) • The sewing speed can be changed, even while the pattern is being sewn. (Refer to "Maximum Sewing Speed Setting" on page 139.) → The machine stops and the start/stop button lights up in red. • Embroidering can also be stopped by touching an area displaying the pattern. • The thread is not trimmed. • To continue sewing, after checking that the upper thread is taut, touch the unlock key, and then press the start/stop button. Memo • If the Reserve Stop key is touched while embroidery is being sewn, the machine stops sewing before the next color begins. (Refer to "Stopping the machine at the next color change" on page 140.) • Before starting to sew, the machine can be set to stop at any thread color change. (Refer to "Specifying pause locations before embroidering" on page 140.) 66