Brother International PR1050X Operation Manual - Page 214
Changing the position of a sticker
View all Brother International PR1050X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 214 highlights
Touch the position for the third pattern will s be connected on the screen, and then touch . In this example, touch the upper right side of the second pattern. • Pattern rotates automatically when corner position is selected. Changing the position of a sticker If the selected pattern or positioning stickers for connecting the next pattern do not easily fit in the embroidering area, follow the on-screen instructions that appear after step l on page 209 in order to move the positioning stickers. For an example, the on-screen instruction appears when you use the embroidery frame with a size of 10 cm × 10 cm (4 inches × 4 inches) to connect patterns as shown below. 2 1 3 4 1 Touch the connecting area 2 Third pattern C 3 Second pattern B 4 Touch to move the third pattern. Follow the on-screen instruction to perform t steps j to n. Press , then touch and then u press the start/stop button to embroider the third pattern. → After embroidering of the third pattern is finished, the following message appears. When finished connecting patterns, touch . 1 Pattern A 2 Pattern B Refer to steps a through l of Connecting a three patterns using the embroidery frame with a size of 10 cm × 10 cm (4 inches × 4 inches) to embroider the first pattern and to connect the second pattern. → After embroidering is finished, at the top left side of the screen disappears. The three patterns have been connected. Touch to clear the pattern. 212