Brother International PR1050X Operation Manual - Page 231

BASIC SETTINGS AND HELP FEATURE Changing the embroidery basting distance The distance from the pattern to the basting stitching can be set to 0.0 mm to 12.0 mm. When the embroidery machine is purchased, "5.0 mm" is selected. Refer to "Basting Embroidery" on page 128 when using this setting. The distance setting can be specified from page 2 of the settings screen. Use and to specify the distance from a the pattern to the basting stitching. Press the "Start/Stop" button or touch the screen display to recover from these modes. These settings can be specified from page 4 of the settings screen. Use or to select the time until a entering the mode. Note • If you turn off the machine while the machine is in the "Eco Mode" or the "Shutoff Support Mode", wait for about 5 seconds before turning on the machine again. Selecting the "Eco Mode" or "Shutoff Support Mode" You can save the machine power by setting the eco mode or the shutoff support mode. If you leave the machine without using for a specified period of time, the machine enters in one of these modes. "Eco Mode"; Machine will enter a sleep mode. Touch the screen or "Start/Stop" button to continue embroidering. "Shutoff Support Mode"; Machine will turn off after set period of time. Turn machine off and then back on to restart embroidering. Changing the screen saver settings ■ Specifying the length of time until the screen saver is displayed 6 The screen saver is displayed when no machine operation is performed for the specified length of time. A setting between "OFF" (0) and "60" minutes can be set in 1-minute increments. When the embroidery machine is purchased, "5 min" is selected. The screen saver settings can be specified from page 4 of the settings screen. Touch and to select the desired a setting. Condition Eco Mode Available time OFF, 10 - 120 (minute) "Start/Stop" button Green flashing Suspended function After recovering Machine light, Screen display The machine starts from the previous operation. Shutoff Support Mode OFF, 1 - 12 (hour) Green slow flashing All functions You need to turn off the machine. 229