Brother International PR1050X Operation Manual - Page 115

Checking if thread spool changes are necessary When selecting a pattern, the number of thread changes can be viewed, however, which thread colors are used in the pattern cannot be checked on this screen. Whether or not and when thread spools will need to be changed can be checked with the following indicators. ■ Time until the machine stops embroidering This indicator shows the amount of time until the machine stops embroidering. The machine stops when a spool change is required, or when the machine is set to be stopped by other settings. If the spool change indicator is appears, the machine will require a spool change. When the time is indicated in red, it is the last color embroidering before the machine stops. 1 OTHER BASIC PROCEDURES ■ Spool change indicator ( ) The spool change indicator in the stitch navigating screen indicates the number of times that the thread spools will need to be changed and the amount of time between changes. Use the scroll bar on the right side of the a thread color sequence display in the embroidering screen. 3 → Each time is touched, the thread color sequence display scrolls down to the next color. After reaching the last color in the thread color sequence display, the first color is selected. • The display can also be scrolled by using the scroll bar. Check the position of . b 2 1 1 Time until the machine stops 1 indicates when the thread spools will need to be changed. The thread spools will need to be changed the number of times that this indicator is displayed and between the two thread colors at the point where it is displayed. 2 Touch to scroll up through the thread color sequence display. Each time this key is touched, the previous color in the thread color sequence display is selected. After reaching the first color in the thread color sequence display, the last color is selected. After checking the desired information, c touch or the top of the scroll bar to return to the first color. 113