Brother International PR1050X Operation Manual - Page 251
Set the beginning of stitching in the lower
![]() |
View all Brother International PR1050X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 251 highlights
With a fabric marker, mark this point on the c fabric. Set the beginning of stitching in the lowerd right corner. → The frame moves so that the needle drop point aligns with the beginning of stitching. With a fabric marker, mark this point on the e fabric. Remove the embroidery frame from the f machine, and then connect these two points to check the embroidering position. • If the baseline is misaligned or intersects another line, reframe the fabric in the embroidery frame or adjust the position of the pattern. APPENDIX 7 249
![](/manual_guide/products/brother-international-pr1050x-operation-manual-4febc6e/251.png)
APPENDIX
249
7
c
With a fabric marker, mark this point on the
fabric.
d
Set the beginning of stitching in the lower-
right corner.
→
The frame moves so that the needle drop point
aligns with the beginning of stitching.
e
With a fabric marker, mark this point on the
fabric.
f
Remove the embroidery frame from the
machine, and then connect these two points
to check the embroidering position.
• If the baseline is misaligned or intersects another line,
reframe the fabric in the embroidery frame or adjust
the position of the pattern.