Brother International PR1050X Operation Manual - Page 134

Selecting/Managing Thread Colors for Each Needle Bar (Manual Color Sequence) The thread colors assigned to each needle bar can be manually specified/managed. In addition, the thread colors can be assigned to needle bars automatically and more efficiently than when the settings are normally specified. Convenience of the manual color Specifying the manual color sequence sequence The manual color sequence is convenient when the machine is being used under the following conditions. ■ When using embroidery data that has no thread color information, such as with DST files The thread spools to be used can easily be selected for data with no thread color information. (For details on the thread color information for DST files, refer to "Colors of Tajima (.dst) embroidery data" on page 250.) ■ When the same combination of thread colors is always used If specific thread colors are assigned to certain needle bars, the thread color settings can be changed with the needle bar number assignments, even when the pattern is changed. The operation is simplified if the same thread colors are always used. ■ When continuously sewing with the same needle bar settings If the settings are specified normally, the needle bar settings are canceled when the embroidering settings screen appears after sewing stops. However, with the manual color sequence, the needle bar settings continue to be applied unless the pattern is deleted or the machine is turned off. This is useful if the same pattern is to be sewn continuously multiple times. Note • The manual color sequence cannot be changed while operations are being performed in the embroidering screen. Touch , and then display page 5 of the a settings screen. Touch , and then select the manual b color sequence. • When the embroidery machine is purchased, "OFF" is selected. Touch c screen. to return to the previous → The icon for the manual color sequence appears in the screen. 132