Brother International PR1050X Operation Manual - Page 303

APPENDIX The needle bar case has stopped at an incorrect position. Touch to automatically reset the needle bar case. The needle bar case motor has locked up. Touch to automatically reset the needle bar case. The automatic needle-threading mechanism did not operate correctly. Remove the thread entangled in the automatic needle-threading mechanism, and then touch . Another operation was performed while the automatic needle-threading mechanism was threading the needle. Press the automatic needle threading button, and then perform the other operation after the needle is threaded. (Refer to page 61.) Too many patterns are being combined for the amount of memory available. Delete some patterns from the combined pattern. The pattern could not be saved because the memory is full. Delete some patterns. The memory capacity of the USB media has been exceeded. There is too much data in either the machine or the USB media. was touched in the embroidering screen. Touch to return to the embroidering settings screen. The previous embroidery in the embroidering screen will be canceled. The selected pattern is going to be deleted because was touched. 7 301