Brother International PR1050X Operation Manual - Page 110

Using the included embroidery positioning sticker In the embroidering settings screen, touch b . Using the camera built into this machine and the included embroidery positioning stickers, the embroidering position can easily be aligned. Affix an embroidery positioning sticker to a the fabric at the desired embroidering position. Align the center of the large circle in the embroidery positioning sticker with the center of the embroidery pattern. When the following message appears, touch c . 1 Embroidery positioning sticker 2 Center of embroidery pattern 3 Embroidering area Note • When hooping the fabric in the embroidery frame, make sure that the embroidery pattern will fit within the embroidering area of the frame being used. From the areas displayed in the LCD, touch d the area containing the embroidery positioning sticker to select it. 1 Embroidering area 2 Embroidery pattern size 3 Embroidery positioning sticker • Depending on the type of fabric to be used, it may not be possible to easily remove the embroidery positioning sticker. Before affixing the embroidery positioning sticker, check how easily the sticker can be removed by affixing it to a scrap of the same type of fabric. Note • The built-in camera may not be able to detect the embroidery positioning sticker if the four corners of the sticker are not firmly affixed to the fabric. Use tape to firmly affix the sticker to the fabric. 108