Brother International PR1050X Operation Manual - Page 190

Select the number of colors you want to use d and then select the desired effect. 1 Press the desired color scheme from e samples. * Touch to display the new schemes. 2 1 Number of colors to be used in the pattern 2 Effects for schemes • When "Random" or "Gradient" is selected, follow the instructions under "When "Random" or "Gradient" is selected" on page 189. Note • You cannot select more thread colors than the number in the selected color group. Memo • Selection for the desired number of colors must stay within the range for the number of thread changes for the pattern you selected. • When using this function the PES data pattern recalled on the machine, and the "PES Thread Code" is set to "ON" in the Settings Screen, the thread colors which are not in the thread table of the machine will not be used to make the color schemes. You can get the color schemes using all the thread colors in the selected pattern by setting "PES Thread Code" to "OFF" in the Settings Screen. (Refer to "Selecting the thread color information for "PES" format data" on page 226.) 1 1 Touch to review the previous schemes after touching . Note • Maximum 10 pages of schemes can be reviewed. After 10 pages of schemes, the oldest page is deleted every time you touch . Press to select the displayed color f scheme. * Touch to return to the previous screen. * You can continue selecting color schemes from the selected page prior to touching . * Touch or to display the other color schemes. 188 → The change thread color screen appears again. Note • The following settings in the settings screen cannot be changed in this function; • Thread color brand selection • Reserved needle setting • "PES Thread Code" setting