Brother International PR1050X Operation Manual - Page 106
Positioning the pattern on thick, fabric
View all Brother International PR1050X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
■ Positioning the pattern on thick fabric When positioning the pattern on the fabric thicker than 2 mm, the fabric may not be detected correctly. In order for the fabric to be correctly detected, its thickness must first be measured. Hoop the fabric in the embroidery frame, a and then attach the frame to the machine. Select the pattern, and then display the b embroidering settings screen. Display page 7 of the settings screen, and c then set "Fabric Thickness Check" to "ON". Affix the embroidery positioning sticker to g the fabric within the area indicated by the red frame in the LCD, and then touch . When the following message appears, h remove the embroidery positioning sticker, and then touch . Press . d Press . e When the following message appears, touch f . → The embroidery positioning sticker affixed to the fabric is detected, and then the embroidery frame will be moved. Continue with step e on page 102 to align i the pattern with the desired embroidery position. → The embroidery frame moves so the fabric can be scanned. CAUTION • Use fabrics with a thickness of less than 3 mm (approx. 1/8 inch). Using fabrics thicker than 3 mm (approx. 1/8 inch) may cause the needle to break. 104