Brother International PR1050X Operation Manual - Page 290
Oiling the machine
View all Brother International PR1050X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 290 highlights
Oiling the machine In order to extend the life of the embroidery machine's parts and keep the machine operating correctly, be sure to oil the machine before the first time that it is used. If too little oil was applied to the race, an error message may appear. Afterward, put a drop of oil onto the hook once a day before use, and put a drop of oil to the lower needle bar felt washer every 40 to 50 hours of machine use. ■ Oiling the race Touch . a Touch . b Put a drop of oil onto the hook. e Front angle view Side view 1 Punch a small hole in oil bottle. 2 Apply oil here. • Use a pointed object to punch a small hole in the tip of the included oiler before using it. Touch f screen. appeared in the following → The race backs to its original position. → Following message appears. After oiling, insert the bobbin case into the g hook, and then close the hook cover. (Refer to page 37.) Open the hook cover, and remove the c bobbin case. (Refer to page 36, 37.) Touch . d→ The race moves to the correct position for oiling. 288