Brother International PR1050X Operation Manual - Page 87

3 Chapter OTHER BASIC PROCEDURES This chapter provides explanations on operations other than those described in chapter 2, such as sewing a pattern with eleven or more colors, changing the needles and changing thread spools. Changing the Needle 86 Replacing the needle 86 Correctly Using the Embroidery Frames 88 Embroidery frame holders 88 When difficult to replace the embroidery frame 88 Types of embroidery frames/frame holders and their applications....89 Attaching Iron-On Stabilizer (Backing) to Fabric .... 92 Hooping the Fabric 93 Hooping the fabric in the extra-large and large embroidery frames ...93 Using the embroidery sheet 94 Large/small pieces of fabric 95 Embroidery Frame Position and Movement 96 Changing the Embroidering Position 98 Adjusting the angle 99 Aligning the Embroidering Position 102 Displaying the fabric while aligning the embroidery position ...102 Using the built-in camera 105 Using the included embroidery positioning sticker 108 Switching the Thread Colors on the Screen........... 110 Embroidering a Pattern Containing Eleven or More Colors 112 Checking if thread spool changes are necessary 113 Changing the Thread Spools with Designs of Eleven or More Colors 114 Change thread spools message and spool thread indicators....114 Easily changing the thread spools 115 If the Thread Breaks or the Bobbin Thread Runs Out While Embroidering 116 If the upper thread breaks 116 If the bobbin thread breaks or runs out 118 Embroidering From the Beginning or Middle of the Pattern 119 Resume Embroidering After Turning Off the Machine ... 122 Adjusting the Thread Tension of both the Bobbin and Upper Thread 124 Adjusting the tension of the bobbin thread 124 Adjusting the tension of the upper thread 125