Brother International PR1050X Operation Manual - Page 301

APPENDIX Error messages If the start/stop button is pressed while the machine is not correctly set up or if an incorrect operation is performed, the machine stops and informs you of the error with a buzzer and an error message. If an error message appears, correct the problem according to the instructions in the message. To close the message, touch or perform the correct operation, then touch appears again, consult your nearest authorized Brother dealer. . If the message Some malfunction occurred. There are too many characters in the curved text arrangement for the selected embroidery frame. Change the text arrangement or the embroidery frame. Machine cannot receive any data from the PC in the Link mode. Turn off the machine, and check the USB connection. After connect the USB cord securely, turn on the machine again. (Refer to page 169) When embroidering the pattern for the optional jumbo frame, the machine failed to find the positioning mark. Follow the procedure from step h on page 260, again. Machine failed to recognize the embroidery positioning mark. Confirm that the embroidery positioning mark is in the selected area. If problem persists, reposition the mark. When in camera mode by touching , some keys are unavailable. Touch to cancel the camera mode to activate the key. 7 299