Brother International PR1050X Operation Manual - Page 61

EMBROIDERING TUTORIAL Wind the thread clockwise once around the f number 1 thread tension disc. 2 Pass the thread through the hole in the d number 1 upper thread guide and pull the thread toward you. 1 Hole in upper thread guide Hold the thread with both hands, and then e pass it under the guide plate from the right. 1 Thread tension disc 2 Pass thread in a clockwise direction at this location on the tension disks. • Make sure that the thread is securely positioned in the thread tension. Note • All thread tension discs are threaded in clockwise direction. Lead the thread along the thread path and g around the correct thread guide pins as indicated on the machine, then slip the thread under the number 1 middle thread guide plate from the right. 1 Upper thread guide plate 1 Thread guide pin 2 Middle thread guide • The path from the upper thread guide around the thread tension disc and to the middle thread guide (steps f through g) may differs depending on the spool number. Passing the thread through the thread guide pins is designed to prevent the thread from becoming tangled. Be sure to follow the thread path indicated on the machine. 59