Brother International PR1050X Operation Manual - Page 105

OTHER BASIC PROCEDURES Use to align the pattern with the f desired embroidery position. • The pattern can be moved to the desired position by using your finger or the touch pen to drag the pattern displayed on the screen. Press to start embroidering. h→ When embroidery is finished, the fabric displayed in the background disappears. Whether or not the fabric is displayed in the background can be specified from page 7 of the settings screen. In addition, "Standard" or "Fine" can be selected for the quality of the background image. 1 2 3 4 3 Memo • If necessary, touch to display a preview in order to check the pattern position. The background can be displayed or hidden by touching in the embroidering settings screen. Press to display the embroidering g settings screen. Memo • The pattern can also be aligned from the embroidering settings screen. 1 Set to "ON" to leave the fabric displayed in the background. 2 When set to "OFF", the background will disappear. 3 Select the quality of the background image. 4 Touch to remove the background image completely. Note • If the embroidery is not sewn, the fabric background will remain on the screen. On page 7 of the settings screen, touch to erase the background image. ■ Saving the background image to USB media By touching , the background image can be saved to USB media. Refer to "Displaying the fabric while a aligning the embroidery position" on page 102 to scan a background image. Insert the USB media into the USB port. b Select the USB port ( or ) that you c want to save to. Select the USB media where the image is to d be saved. → The background image is saved to the USB media. 103