Brother International PR1050X Operation Manual - Page 132
position APPLIQUE POSITION.
View all Brother International PR1050X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Memo • Three steps are added to the sewing order: appliqué cutting line, position of pattern placement on the garment, and appliqué stitching. Use two layers of adhesive water-soluble k stabilizer material with their sticky sides together, and then hoop them in the embroidery frame. 1 2 3 1 Cutting line for appliqué 2 Position of pattern placement on garment 3 Appliqué stitching • We recommend using thread for the cutting line "APPLIQUE MATERIAL" that is closest to the color of the fabric. Fuse or stick a piece of stabilizer to the g back of the felt or denim fabric to be used as the appliqué piece. Hoop the appliqué fabric in the embroidery h frame, attach the embroidery frame to the machine, and then start embroidering. After the cutting line "APPLIQUE i MATERIAL" is embroidered, stop the machine and remove the appliqué material from the embroidery frame. Carefully cut along the stitching. After j cutting, carefully remove all of the cutting line thread. Note • If water-soluble stabilizer is used, it is not necessary to remove the stabilizer material after sewing the appliqué outline. To reduce shrinkage of the pattern, we recommend using water-soluble stabilizer. • Put together two layers of water-soluble stabilizer, otherwise the stabilizer material may tear during embroidering. Sew the placement line for the appliqué l position "APPLIQUE POSITION". 1 Pattern placement line Lightly apply glue or spray adhesive, and m paste the appliqué piece so that it aligns with the placement line. 1 Cutting line for appliqué Note • Depending on the pattern density and fabric used, there may be shrinking of the pattern or the appliqué may be misaligned with the placement line. We recommend cutting slightly outside of the cutting line. • When using patterns that are vertically and horizontally symmetrical, use a chalk pencil to indicate the pattern orientation before cutting it out. • Carefully cut out the pattern on the outline you just sewed. Do not cut inside the cutting line, otherwise the appliqué fabric will not be caught by the appliqué stitch. Note • Before pasting the appliqué piece down, make sure the appliqué piece is positioned correctly within the placement line. 130