Brother International PR1050X Operation Manual - Page 273
of the clamping frame.
View all Brother International PR1050X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 273 highlights
APPENDIX Lift out the sweat guard on the inside of the f cap, and then place the cap over the cap frame. Using both hands, hold both sides of the cap, and then align the edge of the lower frame with the base of the brim. Before closing the clamping frame, push the h ends of the sweat guard into the cap to move them away from the hinge and latch of the clamping frame. 1 Edge of the lower frame 2 Sweat guard 3 Base of the brim At the same time, align the center line of the cap with the centerline of the sweat guard holder on the cap frame, and then slide the sweat guard under the sweat guard holder. 1 Hinge of clamping frame 2 Fold the sweat guard as shown. • Neatly folding the sweat guard before closing the clamping frame helps prevent wrinkles in the cap. Close the clamping frame so that the brim i of the cap passes between the inside clamping frame and the outside clamping frame. 1 Sweat guard holder 2 Center line of sweat guard holder 3 Center line of cap Align the center line of the cap with the g notch in the mounting jig. 1 Brim of the cap 7 2 Inside clamping frame 3 Outside clamping frame Neatly align the teeth of the clamping frame j with the base of the brim. 1 Center line of cap 2 Notch in mounting jig 1 Teeth of outside clamping frame 2 Base of brim 271