Dell 3130cn User's Guide (PDF) - Page 117

Printer Maintenance The Printer Maintenance tab includes the System Settings, Paper Density, Registration Adjustment, Adjust Altitude, Reset Defaults, Non-Dell Toner, Initialize PrintMeter, Tray Setting, TCP/IP Settings, and Network Settings pages. NOTE: Values marked by an asterisk (*) are the factory default menu settings. System Settings Purpose: To Use these settings to configure the printer's power management, warning tones, time-out time, operator panel language setting, job log auto print, position of the Print ID, setting of the dump print, setting of the additional memory, setting of the substitute sheet, mm/inch setting, and duplex print settings. Values: Power Saver Timer Mode 1*1 Power Saver Timer Mode 2*1 Audio Tones Fault Time-Out Time-Out 5-60 Min. 5 Min.* 1-6 Min. 6 Min* Control Panel Tone Invalid Key Tone Machine Ready Tone Job Complete Tone Fault Tone Alert Tone Out of Paper Alert Tone Low Toner Alert Tone Base Tone 0 3-300 sec 60 sec* 0 5-300 sec 30 sec* English* Specifies the time before the printer enters the power saver timer mode 1(sleep mode) after it finishes a job. Specifies the time before the printer enters the power saver timer mode 2 (deep sleep mode) after it finishes a job. Off* Does not emit a tone when the operator panel input is correct. On Emits a tone when the operator panel input is correct. Off* Does not emit a tone when the operator panel input is incorrect. On Emits a tone when the operator panel input is incorrect. Off* Does not emit a tone when the printer becomes ready. On Emits a tone when the printer becomes ready. Off* Does not emit a tone when a job is complete. On Emits a tone when a job is complete. Off* Does not emit a tone when a job ends abnormally. On Emits a tone when a job ends abnormally. Off* Does not emit a tone when a problem occurs. On Emits a tone when a problem occurs. Off* Does not emit a tone when the printer runs out of paper. On Emits a tone when the printer runs out of paper. Off* Does not emit a tone when toner or some other consumable is low. On Emits a tone when toner or some other consumable is low. Off* Does not emit a tone when the operator panel display is returned to the default settings by scrolling the loop menu. On Emits a tone when the operator panel display is returned to the default settings by scrolling the loop menu. Disables the fault time-out. Specifies the amount of time the printer cancels for a job stops abnormally. Disables the job time-out. Specifies the amount of time before the printer cancels for jobs that stop abnormally.