Dell 3130cn User's Guide (PDF) - Page 139

Values: Auto Correct Automatically performs color registration correction. ColorRegi Chart Prints a color registration chart. The color registration chart prints a lattice pattern of yellow, magenta, and cyan lines. On the chart, find the values on the right side that are next to the straightest lines for each of the three colors. If the value for the straightest line is 0, color registration adjustment is not required. If the value for the straightest line is any value other than 0, specify the adjustment values under Enter Number. Enter Number Y -9-+9 M -9-+9 C -9-+9 Specifies the values that are found in the color registration chart for Yellow. Specifies the values that are found in the color registration chart for Magenta. Specifies the values that are found in the color registration chart for Cyan. Adjust Altitude Purpose: To specify the altitude of the location where the printer is installed. The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are performed by specifying the altitude of the location where the printer is being used. NOTICE: An incorrect altitude adjustment setting leads to poor printing quality, incorrect indication of remaining toner, etc. Values: 0m* 1000m Specifies the altitude of the location where the printer is installed. 2000m 3000m Init PrintMeter Purpose: To initialize the print meter of the printer. When the print meter is initialized, the meter count is reset to 0. Reset Defaults Purpose: To initialize the NV (non-volatile) memory. After executing this function and rebooting the printer, all the menu parameters, except the parameters for the network, are reset to their default values. Clear Storage Purpose: To clear all files that are stored as Secure, Store, and Proof Print in the optional hard disk. NOTE: The Clear Storage menu is only displayed when an optional hard disk is installed on your printer. Format HDD Purpose: To initialize the optional hard disk.