Dell 3130cn User's Guide (PDF) - Page 37

DNS Dynamic Update (IPv6)*1 Select the check box to enable dynamic updates to DNS. Auto Generate Search List*1 Search Domain Name*1 Select the check box to automatically generate the search list. Specifies the search domain name. Up to 255 alphanumeric characters, periods, and hyphens can be used. If you need to specify more than one domain name, separate them using a comma or semicolon. WINS*1 LPD Port9100 IPP *1 WSD HTTP IP Filter (IPv4)*2 Time-out*1 Specifies the time-out period between 1 and 60 seconds. Priority to IPv6 DNS Name Resolution Select the check box to enable the DNS Name Resolution feature. WINS Mode Select the check box to get the WINS server address automatically from the DHCP server. WINS Primary Server Sets WINS server address in the nnn.nnn.nnn.nnn format. Each section of nnn.nnn.nnn.nnn is a value between 0 and 254. Note that values 127 and 224 to 254 are not valid for the first three-digits. WINS Secondary Server Sets a back up WINS server address in the nnn.nnn.nnn.nnn format. Each section of nnn.nnn.nnn.nnn is a value between 0 and 254. Note that values 127 and 224 to 254 are not valid for the first three-digits. Connection Time-Out Sets the connection timeout period from 1 to 1000 seconds. IP Filter (IPv4) To set the IP Filter settings, click IP Filter (IPv4). The IP Filter (IPv4) page is displayed. Port Number Sets the port number from 9000 to 9999. Connection Time-Out Sets the connection timeout period between 1 and 1000 seconds. IP Filter (IPv4) To set the IP Filter settings, click IP Filter (IPv4). The IP Filter (IPv4) page is displayed. Printer URI Displays the printer URI. Connection Time-Out Sets the connection timeout period from 1 to 1000 seconds. Port Number Displays the port number for receiving requests from the client. Maximum Sessions Displays the maximum number of connections received simultaneously by the client. Port Number Sets the port number from 8000 to 9999. Receive Time-Out Sets the receive timeout period from 1 to 65535 seconds. Notification Time-Out Sets the notification timeout period from 1 to 60 seconds. Maximum Number of TTL Sets the maximum number of TTL from 1 to 10. Maximum Number of Notification Sets the maximum number of notifications from 10 to 20. Port Number Sets the port number to 80 or from 8000 to 9999. Simultaneous Connections Displays the maximum number of connections received simultaneously by the client. Connection Time-Out Sets the connection timeout period from 1 to 255 seconds. Address Sets the address in the address field. Enter a numeric value between 0 and 255 in each field of "aaa.bbb.ccc.ddd." However, 127 and 224 to 254 cannot be used to "aaa." Address Mask Sets the Subnet Mask in the Mask field. Enter a numeric value between 0 and 255 in each field. Reject Rejects printing from specified network address. Active Mode Permit Permits printing from specified network address. Disabled Disables the IP Filter feature for the specified IP address. *1 An optional network protocol adapter is required to display the item. *2 This item is only available for LPD or Port9100. To configure the IP Filter feature, enter an IP address to be filtered in the Address field and the Subnet Mask in the Address Mask field. Enter a numeric value between 0 and 255 in each field. "*" is appended to the current value. Setup Procedure You can set up to a maximum of five items and the first item takes priority. Enter the shortest address first before proceeding to the next longer address when setting multiple filters. The following section explains how the IP Filter (IPv4) operates. 1. IP Filter Procedure a. Enabling Printing From a Specified User The following describes the procedure to enable printing only from the "192.168.100.10" IP address. Procedures: i. Click the first column of Access List row 1. ii. Enter "192.168.100.10" in the Address field and "255.255.255.255" in the Address Mask field. iii. Select Permit. iv. Click Apply New Settings. b. Disabling Printing From a Specified User