Dell 3130cn User's Guide (PDF) - Page 27

Tray 2 Custom Size - X*3 MPF Mode Display Popup MPF Paper Type MPF Paper Size MPF Custom Size - Y MPF Custom Size - X Displays the width of custom size paper loaded in the tray 2. Displays the paper size and type when paper is loaded in the multipurpose feeder (MPF). Displays a popup menu that prompts to set the paper size and type when paper is loaded in the MPF. Displays the paper type setting of the MPF. Displays the paper size setting of the MPF. Displays the length of custom size paper loaded in the MPF. Displays the width of custom size paper loaded in the MPF. *1 This item is only available when the 512 MB, or higher, optional memory is installed, and also when the optional hard disk is not installed. *2 This item is only available when the optional duplexer is installed. *3 This item is only available when the optional 550 sheet feeder is installed. Reports Purpose: To print various types of reports and lists. Values: Printer Settings Click the Start button to print the printer settings page. Panel Settings Click the Start button to print the panel settings page. PCL Fonts List Click the Start button to print the PCL (Hewlett-Packard Printer Control Language) Fonts List. PCL Macro List Click the Start button to print the PCL Macro List. Job History Click the Start button to print the Job History report. Error History Click the Start button to print the Error History report. PS Fonts List Click the Start button to print the PS Fonts List. Print Meter Click the Start button to print the Print Meter report. Color Test Page Click the Start button to print the Color Test Page. Stored Documents Click the Start button to print the Stored Documents list. This item is only available when the 512MB, or higher, optional memory is installed and the RAM Disk is set to on or the optional hard disk is installed. Printer Settings The Printer Settings tab includes System Settings, Parallel Settings, Network Settings, USB Settings, PCL Settings, PS Settings, and Panel Settings pages. System Settings Purpose: To configure the basic printer settings. Values: Power Saver Timer Mode 1 Power Saver Timer Mode 2 Control Panel Tone Invalid Key Tone Machine Ready Tone Job Completed Tone Fault Tone Alert Tone Out of Paper Alert Tone Low Toner Alert Tone Base Tone Fault Time-Out Sets the time for transition to Power Saver Mode 1. Sets the time for transition to Power Saver Mode 2. Specifies whether to enable the tone that is emitted when the operator panel input is correct. Specifies whether to enable the tone that is emitted when the operator panel input is incorrect. Specifies whether to enable the tone that is emitted when the printer becomes ready. Specifies whether to enable the tone that is emitted when a print job is complete. Specifies whether to enable the tone that is emitted when a job ends abnormally. Specifies whether to enable the tone that is emitted when a problem occurs. Specifies whether to enable the tone that is emitted when the printer runs out of paper. Specifies whether to enable the tone that is emitted when toner or some other consumable is low. Specifies whether to enable the tone that is emitted when the operator panel screen returns to the default by scrolling the loop menu. Specifies in seconds the amount of time the printer should cancel for a job stops abnormally. The print job is cancelled if the time-out time is exceeded.