Dell PowerEdge R815 Hardware Owner's Manual - Page 106
Close the system. See Closing the System
View all Dell PowerEdge R815 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
1 Turn off the system, including any attached peripherals, and disconnect the system from its electrical outlet. 2 Open the system. See "Opening the System" on page 76. 3 Locate the ISCSI KEY connector on the system board. See Figure 6-1. 4 Insert the NIC hardware key into the connector on the board. See Figure 3-15. Figure 3-15. Removing and Installing a NIC Hardware Key 1 2 1 NIC hardware key 2 ISCSI KEY connector 5 Close the system. See "Closing the System" on page 77. 6 Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals. 106 Installing System Components
106
Installing System Components
1
Turn off the system, including any attached peripherals, and disconnect
the system from its electrical outlet.
2
Open the system. See "Opening the System" on page 76.
3
Locate the ISCSI KEY connector on the system board. See Figure 6-1.
4
Insert the NIC hardware key into the connector on the board. See
Figure 3-15.
Figure 3-15.
Removing and Installing a NIC Hardware Key
5
Close the system. See "Closing the System" on page 77.
6
Reconnect the system to its electrical outlet and turn the system on,
including any attached peripherals.
1
NIC hardware key
2
ISCSI KEY connector
2
1