Dell PowerEdge R815 Hardware Owner's Manual - Page 90
Front-Chassis Assembly
View all Dell PowerEdge R815 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Front-Chassis Assembly The front-chassis assembly consists of the hard drives, SAS/SATA backplane, optical drive, control panel assembly, and the front panel display. The frontchassis assembly is mounted on the chassis walls with a sliding rail system. To slide the front-chassis assembly away from the chassis: 1 If installed, remove the front bezel. See "Removing the Front Bezel" on page 75. 2 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 3 Open the system. See "Opening the System" on page 76. 4 Remove the cooling shroud. See "Removing the Cooling Shroud" on page 88. CAUTION: To prevent the memory modules from being damaged, ensure that all cables connected to the front-chassis assembly are free of obstructions. 5 If required, free the power/data cables from the chassis walls. 6 If required, remove the SAS cables connected to the backplane. See Figure 3-10. 7 Press the release tabs inward and slide the assembly forward and away from the chassis. See Figure 3-10. 90 Installing System Components