Dell PowerEdge R815 Hardware Owner's Manual - Page 119
Installing the RAID Battery, See
View all Dell PowerEdge R815 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Figure 3-20. Removing and Installing the RAID Battery 1 2 3 5 4 1 RAID battery carrier 3 RAID battery cable 5 cooling shroud 2 RAID battery 4 RAID battery carrier slot Installing the RAID Battery 1 Insert the RAID battery into the battery carrier in the cooling shroud. See Figure 3-20. 2 Route the RAID battery cable along the chassis wall and through the slot in the battery carrier. 3 Tuck any cable slack into the area in front of the battery carrier slot. 4 Connect the battery cable to the connector on the integrated storage controller card. 5 Replace the cooling fan assembly. See "Installing the Cooling Fan Assembly" on page 104. 6 Close the system. See "Closing the System" on page 77. 7 Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals. Installing System Components 119