Dell PowerEdge R815 Hardware Owner's Manual - Page 89
Installing the Cooling Shroud, Close the system. See Opening and Closing the System
View all Dell PowerEdge R815 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Figure 3-9. Removing and Installing the Cooling Shroud 1 2 3 4 1 cooling shroud 3 shroud tabs (6) 2 RAID battery carrier 4 touch points (2) Installing the Cooling Shroud NOTE: For proper alignment of the cooling shroud in the system, ensure that the cables inside the system are routed along the chassis wall. See Figure 3-10. 1 Lower the cooling shroud into the system and align the cooling shroud tabs with the slots on the system. See Figure 3-9. 2 Insert the RAID battery into the battery carrier in the cooling shroud. See "Installing the RAID Battery" on page 119. 3 Close the system. See "Opening and Closing the System" on page 76. Installing System Components 89
Installing System Components
89
Figure 3-9.
Removing and Installing the Cooling Shroud
Installing the Cooling Shroud
NOTE:
For proper alignment of the cooling shroud in the system, ensure that the
cables inside the system are routed along the chassis wall. See Figure 3-10.
1
Lower the cooling shroud into the system and align the cooling shroud
tabs with the slots on the system. See Figure 3-9.
2
Insert the RAID battery into the battery carrier in the cooling shroud. See
"Installing the RAID Battery" on page 119.
3
Close the system. See "Opening and Closing the System" on page 76.
1
cooling shroud
2
RAID battery carrier
3
shroud tabs (6)
4
touch points (2)
1
3
2
4