Dell PowerEdge R815 Hardware Owner's Manual - Page 91
To slide the front-chassis assembly back into the locked position
View all Dell PowerEdge R815 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Figure 3-10. Sliding the Front-Chassis Assembly 2 1 5 4 3 8 76 1 front-chassis assembly 3 USB cable 5 cable clamp 7 SATA cable 2 control panel cable 4 SAS backplane power cable 6 release tabs (2) 8 SAS cables (2) To slide the front-chassis assembly back into the locked position: 1 Slide the assembly inside until it snaps into position. NOTE: For proper system cooling, ensure that the cables inside the system do not obstruct airflow. 2 Route the SAS and SATA cables along the chassis wall. See Figure 3-10. Installing System Components 91
Installing System Components
91
Figure 3-10.
Sliding the Front-Chassis Assembly
To slide the front-chassis assembly back into the locked position:
1
Slide the assembly inside until it snaps into position.
NOTE:
For proper system cooling, ensure that the cables inside the system do
not obstruct airflow.
2
Route the SAS and SATA cables along the chassis wall. See Figure 3-10.
1
front-chassis assembly
2
control panel cable
3
USB cable
4
SAS backplane power cable
5
cable clamp
6
release tabs (2)
7
SATA cable
8
SAS cables (2)
1
2
3
4
5
6
7
8