Dell PowerEdge R815 Hardware Owner's Manual - Page 108
Installing an Expansion Card, For instructions, see the documentation accompanying the card.
View all Dell PowerEdge R815 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Table 3-4. Expansion Card Installation Priority Card Priority 1 2 3 4 5 6 7 8 9 10 11 12 Card Type PERC H800 PERC 6/E SAS 5/E 10 Gb NICs Converged Network Adapters (CNA) 8G Fiber Channel (single port) 6 Gbps SAS HBA 8G Fiber Channel (dual port) 4G Fibre Channel (single port) 4G Fibre Channel (dual port) SCSI HBA 1 Gb NICs Slot Priority 6,5 6,5 6,5 6,5,1,2 6,5,1,2 6,5,1,2 6,5,1,2 6,5,1,2 2,1,6,5 2,1,6,5 2,1,6,5 2,1,6,5,3,4 Max Allowed 2 2 2 2 2 4 2 2 2-4 2-4 2 2-4 Installing an Expansion Card CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1 Unpack the expansion card and prepare it for installation. For instructions, see the documentation accompanying the card. 2 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 3 Open the system. See "Opening the System" on page 76. 4 Locate the expansion-card connector on the system board/riser. See Figure 6-1 and Figure 3-16. 108 Installing System Components