Dell PowerEdge R815 Hardware Owner's Manual - Page 114
Installing Expansion-Card Riser 2, board and the slot on the chassis. See
View all Dell PowerEdge R815 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Figure 3-18. Installing and Removing Expansion-Card Riser 2 2 3 1 4 5 6 1 expansion-card riser 2 3 slot on chassis 5 riser 2 connector on system board 2 expansion-card slot 5 4 expansion-card slot 6 6 riser guide pins (2) Installing Expansion-Card Riser 2 1 Align the expansion-card riser with the riser guide pins on the system board and the slot on the chassis. See Figure 3-17. 2 Lower the expansion-card riser into place until the expansion-card riser connector is fully seated. 3 If applicable, replace the expansion card(s). See "Installing an Expansion Card" on page 108 on page 72. 114 Installing System Components
114
Installing System Components
Figure 3-18.
Installing and Removing Expansion-Card Riser 2
Installing Expansion-Card Riser 2
1
Align the expansion-card riser with the riser guide pins on the system
board and the slot on the chassis. See Figure 3-17.
2
Lower the expansion-card riser into place until the expansion-card riser
connector is fully seated.
3
If applicable, replace the expansion card(s). See "Installing an Expansion
Card" on page 108 on page 72.
1
expansion-card riser 2
2
expansion-card slot 5
3
slot on chassis
4
expansion-card slot 6
5
riser 2 connector on system board
6
riser guide pins (2)
1
3
5
6
2
4