Dell PowerEdge R815 Hardware Owner's Manual - Page 109
connector aligns with the expansion-card connector., Holding the card by its edges
View all Dell PowerEdge R815 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
5 Lift the expansion-card latch and remove the filler bracket. See Figure 3-16. NOTE: To install an expansion card in the expansion-card connector on the system board, go to step 7. 6 Holding the card by its edges, position the card so that the card-edge connector aligns with the expansion-card connector. 7 Insert the card-edge connector firmly into the expansion-card connector until the card is fully seated. 8 Replace the expansion-card latch. See Figure 3-16. Figure 3-16. Installing and Removing an Expansion Card 1 3 1 expansion-card latch 3 expansion-card connector 2 2 expansion card Installing System Components 109
Installing System Components
109
5
Lift the expansion-card latch and remove the filler bracket. See
Figure 3-16.
NOTE:
To install an expansion card in the expansion-card connector on the
system board, go to step 7.
6
Holding the card by its edges, position the card so that the card-edge
connector aligns with the expansion-card connector.
7
Insert the card-edge connector firmly into the expansion-card connector
until the card is fully seated.
8
Replace the expansion-card latch. See Figure 3-16.
Figure 3-16.
Installing and Removing an Expansion Card
1
expansion-card latch
2
expansion card
3
expansion-card connector
1
2
3