Dell PowerEdge R815 Hardware Owner's Manual - Page 118
RAID Battery (Optional), Removing a RAID Battery
View all Dell PowerEdge R815 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
RAID Battery (Optional) The information in this section applies only to systems with the optional PERC cards without an integral battery backup unit. Removing a RAID Battery 1 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 2 Open the system. See "Opening the System" on page 76. 3 Remove the cooling fan assembly. See "Removing the Cooling Fan Assembly" on page 102. 4 Press the tab on the RAID battery cable connector and pull the cable out of the connector on the storage controller card. 5 Free the RAID battery cable from the slot in the battery carrier. See Figure 3-20. 6 Lift the RAID battery out of the battery carrier. 118 Installing System Components
118
Installing System Components
RAID Battery (Optional)
The information in this section applies only to systems with the optional
PERC cards without an integral battery backup unit.
Removing a RAID Battery
1
Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2
Open the system. See "Opening the System" on page 76.
3
Remove the cooling fan assembly. See "Removing the Cooling Fan
Assembly" on page 102.
4
Press the tab on the RAID battery cable connector and pull the cable out
of the connector on the storage controller card.
5
Free the RAID battery cable from the slot in the battery carrier. See
Figure 3-20.
6
Lift the RAID battery out of the battery carrier.